Part name: Water Temperature Sensor
Part number: KRP1688 (CH12647)
2 Pins Connector Leg (Connector 2 Pin). CH10146 is O-Rring.
The water or coolant temperature sensor KRP1688 is used to measure the temperature of the engine coolant, which can then be fed back to the ECU, to adjust the fuel ignition and timing. Helping to ensure less fuel is supplied when the engine is warm or more when the engine is cold. Alternatively, some engines may use this as an indicator to switch on an electric fan or provide a reading for a dashboard readout. Temperature plays a vital role in engine performance calculations; a sensor failure can quickly lead to issues such as; poor fuel economy, black smoke or overheating. Perkins temperature sensors are carefully selected to they are durable and reliable to give your engine long, productive life.
ΔFAQ
1.What's your power range of Generators?
Answer: We can offer the range from 5kva~3000kva.
2.What's your delivery time?
Answer: Generally,we can delivery in 15-35 days after confirmation of order.
3.What's your payment?
Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment
or L/C at sight. But based on some special project and special order,we can do something support on payment item.
4.What's your warranty?
One year or 1000 hours (according to whichever reach first) from Ex-Factory date
5.What's your MOQ?
Answer:We accept power generator MOQ is 1 set .
WINTPOWER Service System
Customer-focused traditional service better and better service levels worldwide-network Service
Concepts:Ensure that customers at ease using for WINTPOWER Products Serving the customers, WINTPOWER gains trust .Work together with Customers During the service period, WINTPOWER do best firstly and protects customers' interests.
In case of failure to use the generator, WINTPOWER help customer until they know how to use
WINTPOWER Service Principles
Customer foremost and honesty as foundation. Serving the customers heart and soul at all levels 24 hours each day.
Δ Factory Inspection: the test items before delivery are mainly as follows:
1.Each gensets shall be put into commission and loading more than 1 hours totally. They are tested on idle
load, testing range 25% 50% 75% 100% 110% 75% 50% 25% 0%
2.The noise level is tested by requested
3.All of the meters on the control panel shall be tested
The appearance of the genset and all of the label and nameplate shall be checked
Audited Supplier 
){kind=link}